Special Function Test Devices
Custom Solutions for Test Requirements Beyond Limits
Field conditions and specific quality standards that go beyond standard production lines require custom engineering solutions. From microelectronic components requiring IP67 leak-tightness certification to high-volume basic leak testing requirements, bring laboratory-level precision to your production line in every challenging scenario.
BT3000 Series - IP67 and Volumetric Leak Test Device
Specially developed to verify the compliance of electronic or mechanical components exposed to dust, moisture and liquid contact with IP67 standards. With its advanced stabilization algorithm, fast filling capability and ability to analyze volumetric pressure changes, it provides a flawless quality control barrier for high-volume serial production.
Flawless IP67
Verification
With test algorithms optimized to guarantee water and dust resistance standards, it provides complete reliability for outdoor products ranging from microelectronic enclosures to lighting fixtures.
Volumetric Analysis and Fast Filling
While reading pressure changes in closed volumes with high precision, its fast filling architecture minimizes cycle times on your production line and enables uninterrupted testing.
Smart Data Management and IoT
Fully integrates with your Industry 4.0 vision. You can remotely monitor test reports generated in the format you need via IoT technology, receive automatic email reports, or transfer them directly to your computer in Excel format via USB.
Technical Infrastructure and System Features
Measurement Resolution & Scale: 0.1 Pa sensitivity at 1 Bar and 0.5 Pa sensitivity at 6 Bar with differential measurement for IP67 and volume tests. Wide configuration support from -0.9 Bar to 25 Bar.
Automation & PLC Integration: 24V programmable 7 Input / 7 Output port, capable of directly controlling external automation systems, conveyors and valves.
Test Modes: IP67 Special Leak Test, Volume Analysis / Volumetric Test, Pressure Decay (ΔP) and Pressure Decay/Time (ΔP/t).
Industry 4.0 Communication: RS232/RS485 Modbus RTU as standard; optional Profinet, EtherCAT and Ethernet TCP/IP network connectivity.
Interface and User Management: User-friendly 7-inch color touchscreen, memory for more than 500 different test programs, and operator authorization via mechanical key.
Flexible Units and Verification: Testing flexibility in international units such as Pa, Pa/sn, sccm and cm³/min, with practical master/calibration verification through the front-panel port.
BT1000 Series - Standard-Level Multi-Test Device
A standard test device developed for standard production lines, machine manufacturers / OEMs and basic leak testing requirements. It is optimized to deliver reliable results in standard quality control steps that do not require complex processes. Thanks to its compact structure, it can be easily integrated into machine chassis and automation panels, and it can control the automation system.
User-Friendly Interface Design
Thanks to its 5-inch color touchscreen, test programs and parameters can be adjusted extremely easily. This practical design enables operators to manage the system without the need for additional training and accelerates your standard quality control steps.
50% Speed Increase with Integrated Pre-Fill
For processes requiring higher test speeds, the optional pre-fill outputs added to the hardware fill test parts much faster and shorten cycle times by up to 50%, increasing operational efficiency.
Smart Data Management and IoT
Fully integrates with your Industry 4.0 vision. You can remotely monitor test reports generated in the format you need via IoT technology, receive automatic email reports, or transfer them directly to your computer in Excel format via USB.
Technical Infrastructure and System Features
Measurement Resolution & Scale: Wide measurement range from -1 Bar to +25 Bar. 10 Pa resolution optimized for standard leak tests.
Automation & PLC Integration: Built-in PLC module manages conveyor systems through 7 externally usable inputs and 7 outputs.
Test Modes: Pressure Decay Test, Pressure Decay Rate Test and Blockage Test modes.
Industry 4.0 Communication: RS232/RS485 Modbus RTU as standard; optional Profinet, EtherCAT and Ethernet TCP/IP network connectivity.
Interface and User Management: User-friendly 5-inch HMI color touchscreen, memory for more than 500 different test programs, and operator authorization via mechanical key.
Flexible Units and Verification: Testing flexibility in international units such as Pa, Pa/sn, sccm and cm³/min.
Perfect
Your System
Crown the daily operational verification you perform on your production line with internationally recognized official documentation. Rely on Adlema’s Accredited Calibration Laboratory for the periodic pressure calibration of your leak testing devices and all pneumatic measuring instruments in accordance with ISO and GMP standards.
Keep your devices audit-ready at all times and your measurements within zero-defect tolerance.